DTC Code B1055 – What does this code mean?
<p>The DTC code B1055 indicates a short circuit in the driver air bag module, including the spiral cable, which is detected by the air bag diagnosis sensor unit.</p>
Symptoms for DTC Code B1055
<ul>
<li><b>Air Bag Warning Light ON</b>: The air bag warning light illuminates on the dashboard, indicating a potential issue with the air bag system. This is often linked to a short circuit in the driver air bag module.</li>
</ul>
Common Causes for DTC Code B1055
<ul><li>The driver air bag may be faulty, leading to a short circuit within the module.</li><li>A faulty spiral cable can cause intermittent or continuous short circuits in the air bag system.</li><li>The driver air bag harness might be shorted, causing a disruption in the electrical flow.</li><li>Poor electrical connections in the driver air bag circuit can lead to shorts and improper air bag deployment.</li></ul>
Determine the
root cause with AI
Enter symptoms and error codes and analyze them with artificial intelligence
✓ Quick
Diagnosis in less than 3 min
✓ Personalized
Tailored to your case
✓ Data-based
with >40k reference case
Troubleshooting for DTC Code B1055
<ul>
<li><b>Initial Inspection</b>: Visually inspect the driver airbag module and related wiring for any obvious signs of damage, wear, or corrosion.</li>
<li><b>Check Airbag Module Connections</b>: Ensure all connectors to the driver airbag module are securely connected and free of debris or corrosion.</li>
<li><b>Measure Resistance</b>: Using a multimeter, measure the resistance of the driver airbag module circuit. Compare the readings to the manufacturer's specifications.</li>
<li><b>Inspect Clock Spring</b>: Check the clock spring for continuity and proper operation, as it can affect the airbag module's electrical connection.</li>
<li><b>Scan for Additional Codes</b>: Use an OBD-II scanner to check for any additional DTCs that may provide further insight into the issue.</li>
<li><b>Test Airbag Control Module</b>: Verify the functionality of the airbag control module by performing a diagnostic test using the appropriate scan tool.</li>
<li><b>Check Ground Connections</b>: Ensure all ground connections related to the airbag system are clean, tight, and free of corrosion.</li>
<li><b>Replace Faulty Components</b>: If any component is found to be faulty during the above tests, replace it and clear the DTC code. Re-test the system to confirm the issue is resolved.</li></ul>
Severity Description for DTC Code B1055
<p>The DTC code B1055 indicates a short in the Driver Air Bag Module. This is a critical issue as it directly affects the vehicle's safety systems.</p><ul><li><b>Immediate Actions:</b> Inspect the airbag module and related wiring for shorts or damage.</li><li><b>Potential Risks:</b> Delayed repair can result in airbag malfunction, leading to severe injury or death in the event of an accident.</li></ul>