DTC Code B1682 – What does this code mean?
<p><b>DTC Code B1682</b> indicates that the Passive Anti-Theft System (PATS) is disabled. This occurs when the transceiver module fails to read the PATS key identification code and communicate it to the Powertrain Control Module (PCM) during the vehicle start sequence.</p>
Symptoms for Error Code B1682
<ul>
<li><a href="/problems/engine-warning-light-on"><b>Engine Light ON</b></a>: The engine light or service engine soon warning light illuminates on the dashboard, indicating a potential issue with the Passive Anti-Theft System (PATS). This symptom is often linked to the B1682 DTC code, which signifies that the PATS is disabled.</li>
</ul>
Common Causes for Error Code B1682
<ul><li>The connection between the Passive Anti-Theft System (PATS) and the transponder may be disrupted, leading to communication issues.</li><li>A malfunctioning PATS transceiver can prevent the system from recognizing the key, disabling the anti-theft system.</li><li>The Powertrain Control Module (PCM) might be faulty, affecting the overall operation of the PATS.</li><li>A defective PATS key can fail to transmit the correct signal, causing the system to disable.</li></ul>
Determine the
root cause with AI
Enter symptoms and error codes and analyze them with artificial intelligence
✓ Quick
Diagnosis in less than 3 min
✓ Personalized
Tailored to your case
✓ Data-based
with >40k reference case
Troubleshooting for Error Code B1682
<ul>
<li><b>Verify DTC Code</b>: Ensure the DTC B1682 is present using a diagnostic scanner. This code indicates that the Passive Anti-Theft System (PATS) is disabled.</li>
<li><b>Check PATS Key</b>: Inspect the PATS key for damage or wear. Ensure the key is the correct one for the vehicle and is not a duplicate or aftermarket key.</li>
<li><b>Inspect PATS Antenna</b>: Examine the PATS antenna located around the ignition lock cylinder for any visible damage or disconnection.</li>
<li><b>Test PATS Module</b>: Use a multimeter to check the PATS module for proper voltage and ground connections. Ensure there are no open or short circuits.</li>
<li><b>Check Wiring and Connectors</b>: Inspect the wiring and connectors between the PATS module and the PCM for any signs of corrosion, damage, or loose connections.</li>
<li><b>Reprogram PATS</b>: If all components are functioning correctly, consider reprogramming the PATS system using the appropriate diagnostic tool to reset the system.</li>
<li><b>Perform System Test</b>: After repairs or reprogramming, perform a system test to ensure the PATS is enabled and functioning correctly.</li></ul>
Severity Description for Error Code B1682
<p>The DTC code B1682 indicates that the Passive Anti-Theft System (PATS) is disabled. This is a <b>critical</b> issue as it compromises vehicle security, making it vulnerable to theft. Immediate attention is required to restore the system's functionality. Delaying repair could result in unauthorized access or theft, posing a significant risk to the vehicle's safety and security.</p>