DTC Code P00AA – What does this code mean?

Severity:
critical
<p>The DTC code P00AA indicates an issue with the Intake Air Temperature (IAT) Sensor 1 Circuit Bank 2, where the Powertrain Control Module (PCM) detects that the IAT sensor signal is out of factory specifications.</p>

Symptoms for Fault Code P00AA

<ul> <li><b>Engine Light ON (or Service Engine Soon Warning Light)</b>: <p>The engine control module (ECM) detects an issue with the Intake Air Temperature (IAT) Sensor 1 Circuit Bank 2, triggering the engine light. This can be caused by:</p><ul><li>Faulty IAT sensor</li><li>Wiring issues such as open or short circuits</li><li>Corroded or damaged connectors</li><li>ECM malfunction</li></ul></li> </ul>

Common Causes for Fault Code P00AA

<ul><li>Faulty Intake Air Temperature Sensor 1 can lead to incorrect readings, affecting engine performance.</li><li>An open or shorted harness in the Intake Air Temperature Sensor 1 can disrupt the signal transmission.</li><li>Poor electrical connections in the Intake Air Temperature Sensor 1 circuit can cause intermittent or faulty sensor readings.</li></ul>

Determine the
root cause with AI

Enter symptoms and error codes and analyze them with artificial intelligence
Car details
Symptoms
Error codes
Thank you!
Oops! Something went wrong while submitting the form.
✓ Quick
Diagnosis in less than 3 min
✓ Free
No hidden fees
✓ Personalized
Tailored to your case
✓ Data-based
with >40k reference case

Troubleshooting for Fault Code P00AA

<ul> <li><b>Initial Scan</b>: Use an OBD-II scanner to confirm the presence of DTC P00AA and check for any additional codes that may be related.</li> <li><b>Visual Inspection</b>: Inspect the intake air temperature sensor and its wiring for any visible damage, corrosion, or disconnections.</li> <li><b>Check Sensor Voltage</b>: With the ignition on, use a multimeter to measure the voltage at the intake air temperature sensor connector. Verify it matches the manufacturer's specifications.</li> <li><b>Test Sensor Resistance</b>: Disconnect the sensor and measure its resistance using a multimeter. Compare the readings to the manufacturer's specifications to ensure the sensor is functioning correctly.</li> <li><b>Inspect Wiring and Connectors</b>: Check the wiring harness and connectors for continuity and proper connection. Repair or replace any damaged components.</li> <li><b>Check ECM/PCM</b>: Verify that the Engine Control Module (ECM) or Powertrain Control Module (PCM) is receiving the correct signal from the intake air temperature sensor. Reprogram or replace the ECM/PCM if necessary.</li> <li><b>Clear Codes and Test Drive</b>: Clear the DTC codes using the OBD-II scanner and perform a test drive to ensure the issue is resolved and the code does not reappear.</li></ul>

Severity Description for Fault Code P00AA

<p>The DTC code P00AA indicates an issue with the Intake Air Temperature Sensor 1 Circuit Bank 2. This is a critical issue as it can affect the engine's air-fuel mixture, leading to poor performance, increased emissions, and potential engine damage.</p><ul><li><b>Immediate Actions:</b> Inspect and replace the faulty sensor or wiring.</li><li><b>Risks of Delayed Repair:</b> Prolonged driving with this issue can cause severe engine damage and reduced fuel efficiency.</li></ul>

Related error codes

P1330

C111A

U0415

C1903

B263A

P24B6