DTC Code P0295 – What does this code mean?
<p>DTC Code P0295 indicates a Cylinder 12 Injector Circuit High condition, where the Engine Control Module (ECM) detects a high voltage in the injector circuit for cylinder 12.</p>
Symptoms for DTC Code P0295
<ul>
<li><b>Malfunction Indicator Light (MIL) Illumination</b>: The MIL will illuminate, indicating a stored P0295 code. This is often the first sign of an issue with the Cylinder 12 Injector Circuit.</li>
<li><b>Rough Idle</b>: The engine will run rough at idle, which can be caused by an imbalance in the fuel-air mixture due to the injector circuit issue.</li>
<li><b>Poor Fuel Economy</b>: Fuel economy will suffer as the engine may not be receiving the correct amount of fuel, leading to inefficient combustion.</li>
<li><b>Lack of Power</b>: There will be a noticeable lack of power, indicated by poor acceleration. This is due to the engine not receiving the proper fuel delivery from Cylinder 12.</li>
</ul>
Common Causes for DTC Code P0295
<ul><li>Faulty electrical harness from the PCM to the injector can cause improper voltage delivery.</li><li>Faulty electrical connector on the fuel injector may lead to poor connectivity and high resistance.</li><li>Internally shorted fuel injector can result in excessive voltage draw, triggering the error code.</li><li>Plugged or dirty fuel injector can obstruct fuel flow, affecting injector performance.</li></ul>
Determine the
root cause with AI
Enter symptoms and error codes and analyze them with artificial intelligence
✓ Quick
Diagnosis in less than 3 min
✓ Personalized
Tailored to your case
✓ Data-based
with >40k reference case
Troubleshooting for DTC Code P0295
<ul>
<li><b>Initial Scan</b>: Use an OBD-II scanner to confirm the presence of DTC P0295 and check for any additional codes that may be related.</li>
<li><b>Visual Inspection</b>: Inspect the wiring and connectors for Cylinder 12 injector for any signs of damage, corrosion, or disconnection.</li>
<li><b>Check Injector Resistance</b>: Use a multimeter to measure the resistance of the Cylinder 12 injector. Compare the reading to the manufacturer's specifications.</li>
<li><b>Inspect Power Supply</b>: Verify that the injector is receiving the correct voltage by checking the power supply to the injector with a multimeter.</li>
<li><b>ECU Inspection</b>: Check the Engine Control Unit (ECU) for any signs of damage or malfunction that could affect the injector circuit.</li>
<li><b>Test Injector Operation</b>: Use a noid light or an oscilloscope to test the operation of the injector to ensure it is functioning correctly.</li>
<li><b>Check Ground Connection</b>: Ensure that the ground connection for the injector circuit is secure and free of corrosion.</li>
<li><b>Replace Injector</b>: If all tests indicate a faulty injector, replace the Cylinder 12 injector and clear the code. Re-test to confirm the issue is resolved.</li></ul>
Severity Description for DTC Code P0295
<p>The DTC code P0295 indicates a high voltage issue in the injector circuit for cylinder 12. This is a <b>critical</b> issue as it can lead to severe engine misfires, reduced performance, and potential engine damage. Immediate actions should include inspecting the injector wiring, connectors, and the injector itself. Delayed repair can result in further engine damage and increased repair costs.</p>