DTC Code P1352 – What does this code mean for Volkswagen?

Severity:
moderate

The DTC code P1352 for Volkswagen vehicles indicates an issue with the ignition control (IC) output being high or a pulse being detected when the ground for cylinder 2 is expected.

Symptoms for Fault Code P1352

  • Engine Misfire: The engine may misfire, particularly in cylinder 2, due to improper ignition timing or spark delivery. This can be caused by a faulty ignition coil, spark plug, or wiring issue.
  • Poor Fuel Economy: The vehicle may experience reduced fuel efficiency as a result of incomplete combustion in cylinder 2. This can be linked to a malfunctioning ignition coil or spark plug.
  • Rough Idling: The engine may idle roughly or inconsistently, which can be attributed to a misfire in cylinder 2. Potential causes include a defective ignition coil or spark plug.
  • Check Engine Light: The Check Engine Light may illuminate due to the detected fault in the ignition circuit of cylinder 2. This is often caused by issues with the ignition coil, spark plug, or related wiring.
  • Reduced Engine Performance: The vehicle may exhibit reduced power and acceleration due to the misfire in cylinder 2. This can be caused by a failing ignition coil or spark plug.

Common Causes for Fault Code P1352

  • The ignition coil for cylinder 2 may be faulty, leading to improper spark generation.
  • There could be a wiring issue, such as a short or open circuit, in the ignition system for cylinder 2.
  • The engine control module (ECM) might be malfunctioning, causing incorrect signals to be sent to the ignition coil.
  • A poor ground connection for cylinder 2's ignition system could result in high resistance and improper operation.
  • Corrosion or damage to the connectors and terminals associated with cylinder 2's ignition system could disrupt proper function.

Determine the
root cause with AI

Enter symptoms and error codes and analyze them with artificial intelligence
Car details
Symptoms
Error codes
Thank you!
Oops! Something went wrong while submitting the form.
✓ Quick
Diagnosis in less than 3 min
✓ Free
No hidden fees
✓ Personalized
Tailored to your case
✓ Data-based
with >40k reference case

Troubleshooting for Fault Code P1352

  • Initial Scan: Use an OBD-II scanner to confirm the presence of DTC P1352 and check for any additional codes.
  • Visual Inspection: Inspect the ignition coil, wiring, and connectors for cylinder 2 for any visible damage or corrosion.
  • Check Ignition Coil: Test the ignition coil for cylinder 2 using a multimeter to ensure it is within the manufacturer's specified resistance range.
  • Inspect Wiring Harness: Check the wiring harness for continuity and ensure there are no shorts or open circuits between the ignition coil and the Engine Control Module (ECM).
  • Test ECM Output: Use an oscilloscope to check the ECM output signal to the ignition coil for cylinder 2. Ensure the signal is consistent and within specifications.
  • Check Ground Connections: Verify that all ground connections related to the ignition system are clean, secure, and free of corrosion.
  • Replace Faulty Components: If any component such as the ignition coil, wiring, or ECM is found to be faulty, replace it and clear the DTC code. Re-scan to ensure the issue is resolved.

Severity Description for Fault Code P1352

The DTC code P1352 for Volkswagen indicates an issue with the ignition coil output for cylinder 2. This can lead to misfires, reduced engine performance, and increased emissions.

  • Immediate Actions: Inspect the ignition coil, wiring, and connectors for damage or corrosion.
  • Replace faulty components to prevent further engine damage.

Delaying repair can result in more severe engine issues and higher repair costs.

Related error codes

MechanX strives to provide correct information, but assumes no liability for any errors.
Please don't rely solely on our content.