DTC Code U024C – What does this code mean?
<p>DTC Code U024C indicates a <b>Lost Communication With Seat Control Module 'H'</b> on vehicles using a Controller Area Network (CAN) bus system. This code is triggered when the CAN bus fails to receive a periodic message from the Seat Control Module 'H', suggesting a communication disruption.</p>
Symptoms for Fault Code U024C
<ul>
<li><a href="/problems/engine-warning-light-on"><b>Engine Light ON</b></a>: The engine light or service engine soon warning light illuminates on the dashboard, indicating a communication issue with the Seat Control Module 'H'. This can be linked to potential causes such as a faulty module, wiring issues, or network communication errors.</li>
</ul>
Common Causes for Fault Code U024C
<ul><li>The Seat Control Module 'H' may be faulty, leading to a loss of communication with the vehicle's network.</li><li>An open or shorted harness in the Seat Control Module 'H' can disrupt the communication, causing the error code to trigger.</li><li>Poor electrical connections in the Seat Control Module 'H' circuit can result in intermittent or complete loss of communication.</li></ul>
Determine the
root cause with AI
Enter symptoms and error codes and analyze them with artificial intelligence
✓ Quick
Diagnosis in less than 3 min
✓ Personalized
Tailored to your case
✓ Data-based
with >40k reference case
Troubleshooting for Fault Code U024C
<ul>
<li><b>Verify DTC Code</b>: Ensure the DTC U024C is active and not a historical code. Clear the code and see if it returns after a test drive.</li>
<li><b>Inspect Wiring and Connectors</b>: Check the wiring and connectors between the Seat Control Module 'H' and the main control unit for any signs of damage, corrosion, or disconnection.</li>
<li><b>Check Power and Ground</b>: Verify that the Seat Control Module 'H' is receiving proper power and ground. Use a multimeter to check for voltage and continuity.</li>
<li><b>Test CAN Bus Communication</b>: Use a scan tool to check the CAN bus communication lines for any faults or interruptions that may affect the Seat Control Module 'H'.</li>
<li><b>Inspect Seat Control Module 'H'</b>: Examine the Seat Control Module 'H' for any physical damage or signs of failure. Replace if necessary.</li>
<li><b>Reprogram or Replace Module</b>: If all else fails, consider reprogramming or replacing the Seat Control Module 'H' to resolve the communication issue.</li></ul>
Severity Description for Fault Code U024C
<p>The DTC U024C indicates a <b>loss of communication</b> with the Seat Control Module 'H'. This issue can lead to <ul><li>malfunctioning seat adjustments</li><li>potential safety concerns</li></ul> if not addressed. While it may not immediately affect vehicle operation, prolonged neglect could result in <b>increased discomfort</b> and <b>compromised safety</b> during driving.</p>
.svg)
